Neousys Technology Nuvo-8208GC Series Скачать руководство пользователя страница 124

Страница: 124 / 141

Nuvo-8208GC

124

OS Support and Driver Installation

5.1

Operating System Compatibility

The system supports most operating system developed for Intel® x86 architecture. The

following list contains the operating systems which have been tested by Neousys Technology.



Microsoft Window 10 (x64)



Fedora 29**



Ubuntu 16.04.5 LTS** & Ubuntu18.04.0 LTS**

NOTE

For other Linux OS, Linux kernel should upgrade to 4.15.18.

*For Linux system, user may need to manually compile and install the driver for Intel graphics

or I210 GbE controller if the driver is not embedded in kernel. You can visit Intel website for

further information.

For distributions, graphics driver and RAID function may not be completely implemented in

its kernel. You may encounter restrictions when using these features, such as triple

independent display and RAID. For optimum operation, it is the users’ responsibility to

manually check for new drivers and upgrades!

Neousys may remove or update operating system compatibility without prior notice. Please

Содержание Nuvo-8208GC Series














































































































































Результаты поиска

Содержание Nuvo-8208GC Series

Отзывы:

Neousys Technology Nuvo-8208GC Series, Руководство пользователя, Страница: 124 / 141

Результаты поиска

Содержание Nuvo-8208GC Series

Отзывы: