Neousys Technology Nuvo-8108GC Series Скачать руководство пользователя страница 5

Страница: 5 / 142

Contact Information/ Declaration of Conformity

Contact Information

Headquarters

(Taipei, Taiwan)

Neousys Technology Inc.

15F, No.868-3, Zhongzheng Rd., Zhonghe Dist., New Taipei City, 23586, Taiwan

Tel: +886-2-2223-6182 Fax: +886-2-2223-Americas

(Illinois, USA)

Neousys Technology America Inc.

3384 Commercial Avenue, Northbrook, IL 60062, USA

Tel: +1-847-656-China

Neousys Technology (China) Ltd.

Room 612, Building 32, Guiping Road 680, Shanghai

Tel: +86-2161 Declaration of Conformity

FCC

This equipment has been tested and found to comply with the limits for a Class

A digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference when

the equipment is operated in a commercial environment. This equipment

generates, uses, and can radiate radio frequency energy and, if not installed

and used in accordance with the instruction manual, may cause harmful

interference to radio communications. Operation of this equipment in a

residential area is likely to cause harmful interference in which case the user will

be required to correct the interference at own expense.

The product(s) described in this manual complies with all applicable European

Union (CE) directives if it has a CE marking. For computer systems to remain

CE compliant, only CE-compliant parts may be used. Maintaining CE

compliance also requires proper cable and cabling techniques.

Содержание Nuvo-8108GC Series















































































































































Результаты поиска

Содержание Nuvo-8108GC Series

Отзывы:

Neousys Technology Nuvo-8108GC Series, Руководство пользователя, Страница: 5 / 142

Результаты поиска

Содержание Nuvo-8108GC Series

Отзывы: