Neopost MaxiMailer HD, Руководство оператора

Страница: 21 / 69

21 MaxiMailer HD Operator Manual
Press OMR name and edit the name as required, either by typing it or by
using the on-screen keyboard. Any changes made here will be reflected in the
OMR Code list box when the OMR screen is saved and exited. Warning! Do
not delete an existing setup if it is used in a current job. If you do, the
factory default will be substituted.
Set the Definition mode: Options are As printed / As fed. If ‘As printed’ the
software will adjust for the mark direction whichever way round the paper is
fed, and whichever way up it is loaded in the hopper. If ‘As fed’, it must be in
the direction and orientation as specified in the unit settings in ‘Configuration’
– this mostly applies to legacy jobs.
Set the Code type (1-track or 2-track), Number of marks, Gate orientation
(top, bottom, left or right, as shown below):
editing the
settings.
From this screen you can edit the OMR setup selected in the List Box, or select ‘New’ if
creating a new setup. The setup name and all OMR settings can be changed as required.
5.5 The OMR Code screen