Neopost MaxiMailer HD Скачать руководство пользователя страница 19

Страница: 19 / 69

MaxiMailer HD Operator Manual

5.4.1 The

setup screen

explained

From this screen, you make changes to the machine setup. Changes

can then be saved and will remain until they are changed again. To

enter the screen, press the setup button

on the Run screen.

OMR Code

barcodes/

labels

Documents

envelopes

Configuration

Job

Users

statistics

engineering

admin

Run screen

Allows OMR mark settings to be created, viewed or altered.

Allows Bar Code settings to be created, viewed or altered.

Allows form and insert settings to be defined or altered.

Allows envelope settings to be defined or altered.

Configure the machine for all settings to use with the selected

stationery

Create a new job, or alter an existing one.

Allows a new user to be added, and a password and permissions to be

set. These can be also be altered for existing operators.

Displays information on current machine settings, production run data

etc.

Allows hardware set-up of the machine, and diagnosis of various parts.

Only available to personnel with engineer access, and described in detail

in the machine Service Manual.

Allows administration of various machine functions.

Press this to take you back to the Run Screen.

5.4 The setup screen

Содержание MaxiMailer HD






































































Результаты поиска

Содержание MaxiMailer HD

Отзывы:

Похожие инструкции для MaxiMailer HD

Бренды по названию

Популярные бренды

Neopost MaxiMailer HD, Руководство оператора

Результаты поиска

Содержание MaxiMailer HD

Отзывы:

Похожие инструкции для MaxiMailer HD

Бренды по названию

Популярные бренды