Neopost MaxiMailer HD, Руководство оператора

Страница: 12 / 69

12 MaxiMailer HD Operator Manual
5.2 starting
the Operating
Program
When you first start the operating program, you will be presented
with the Run Screen, shown below and described in detail on the
following page. The program will start with the last used operator and
configuration, as shown at the top of the screen. To log on as another
user. press the ‘User’ button and select one from the list. Enter the
password, either by typing it in, or use the on-screen keyboard and
press return (note that the password is case-sensitive). Assuming the
correct password has been entered, the Run Screen will be available
for use, as shown on the following page.
User button
note: new operators and passwords can be only be entered or
edited by authorised personnel with supervisor access. This is
detailed in section 5.11 ‘The Users screen’ on page 39.