Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021
18
Annex A. Sensor usage with Teltonika FMB trackers
This application is only for information. If you have any problems or questions, please refer to
the operation manual of the tracker you use.
By default, the sensor is already configured to send readings automatically. The sensor
settings do not need to be changed. It is sufficient to prepare the sensor for operation according to
clause 4.1. Installation.
To avoid problems, we recommend at first to update the tracker to the latest available
firmware version.
Connect the Teltonika device to the Configurator by any convenient way. In the left menu,
find the item
«Bluetooth 4.0» and select it
In the opened menu you’ll see the following:
The configuration of the joint operation of the tracker and ADM sensors is done with the help
of BLE connectionless functions
«setting. This default setting contains four subforms with the
name
«connection» and the serial number of the sensor under configuration.
In the
«connection1» subform, select the “Advanced” option as the operating mode. The
subform will automatically expand and will look as follows:
Содержание ADM35
Страница 1: ......
