Neomatica ADM35, Руководство по эксплуатации

Страница: 12 / 22

Neomatica LLC, Bluetooth sensor ADM35, ADM35H, version 1.1 dd 02.07.2021
12
support data receipt via such technology. BLE mode is given by default.
•
Transmitter power
By default, transmitter power is +4dBm. The higher the power the more the data
transmission distance, but it leads to more power consumption. Reducing the power saves
energy and reduces the data transmission distance. It is not recommended to change this
parameter without a reason.
•
Temperature calibration
Setting the offset of the temperature readings in the entire measurement range. It is not
recommended to change this parameter if there is no need.
•
Factory reset
All device settings will be return to factory ones.
•
Firmware update.
Here you can update the firmware
•
Information
Here you can see current connection mode with the smartphone (for sensor configuration).
Data are presented in the mode that was selected in
«Mode of data transfer».
4.2.3 Report generation in
«ADM BLE-Configurator» application
•
Wait until the sensor is detected and see the date and time of the last data synchronization.
Only the synchronized data will be recorded in the report
•
Synchronize the records in case of necessity. For synchronization click on the icon
and switch to the
«Control» menu. The synchronization is done each time when you switch
to the
«Control» menu. While performing this operation, the missing records are
downloaded from the sensor memory to the smartphone memory.
•
Make sure that the synchronization is completed. The incomplete synchronization process
is indicated by the display of a running green bar (status bar) in the upper part of the
configurator window. After the synchronization is complete, go back to the sensor search
menu.
•
To generate the report, click on the icon . This button is located at the top of the
configurator.
•
Select the sensor for which you want to generate a report.
•
Select the time period for which you want to generate a report.
•
Send the report or open it in your smartphone. The report is saved as a table in csv format.
File save path /Neomatica/ADM_BLE_Configurator/reports.