Neomatica LLC. Vehicle tracker ADM333BLE GLONASS/GPS. Ver. 1.2 dd 13.07.2019
11
5 Tracker setting
5.1 Connection to ADM configurator
To connect the ADM333 tracker to a personal computer using Bluetooth wireless technology,
do the following:
1)
Bring the Bluetooth adapter of the PC to the working state;
2) Start the ADM Configurator program of the version 2.4.3 or later (available for loading in
website http://neomatica.com);
3) Switch the ADM Configurator to the Bluetooth radio connection mode. To do this, you need
to select the way to connect the device by clicking on the Bluetooth icon in the upper left
corner of the ADM Configurator, as shown in Figure 4;
4) Supply power to the tracker;
5) If there are several active trackers within the reach of the Bluetooth adapter of the personal
computer, select the "Select device" flag and enter the last 4 digits of IMEI as shown in
Figure 5. If there is only one tracker within the reach of the Bluetooth adapter of the
personal computer it is possible to remove “Select device” flag. In such a case a random
tracker from all the detected ones will be connected.
Рисунок 5 – ADM Configurator waiting for device connection
