NEO PX750BT, Руководство пользователя

Страница: 29 / 340

Chapter 2: Basic Checkout
Preparing NEO for Operation
NEO Hand-Held with Windows Mobile 6.1 User Manual 11
2.1 Preparing NEO for Operation
2.1.1 The Main Battery
NEO is powered with a high-capacity, lithium-ion battery pack – Model No. WA3006.
2.1.1.1 Charging the Main Battery
Battery packs shipped from the factory are charged to approximately 40% and must be fully
charged prior to use. Batteries can be charged using a variety of chargers and docking sta-
tions along with a NEO internal charger. When using the internal charger, a suitable power
source is required. All chargers and docking stations are described in Chapter 7: “Peripheral
Devices & Accessories” beginning on page 203 for details.
2.1.2 Backup Power
A super capacitor provides a minimum of 10 minutes of suspend mode backup power to
NEO to protect data while you swap in a new battery; all unnecessary draws on power such
as the display and CPU are shut down to preserve power.
2.2 Switching NEO On and Off
2.2.1 Installing the Battery and Switching the Unit On
• Push in the release latch at the base of the battery cover to unlatch it. Remove the
battery cover.
Warning: Before charging the battery, it is critical that you review the safety guidelines
in the ‘NEO Hand-Held Computer (Model No. PX750) Regulatory &
Warranty Guide’, PN 8000175.
Note: If you are powering up a new unit, a warning message may appear on the screen
indicating that the backup battery capacity is low. To recharge the internal battery,
you must fully charge NEO with the main battery installed in the unit.
Important: When you initially power up the hand-held, leave the battery in the unit for a
minimum of 2 minutes to allow the super capacitor to reach full capacity.
Important: Before opening the battery cover on your hand-held, press [FN/BLUE]
[ENTER] to turn off the hand-held.