Nematron AESQ67-967 Скачать руководство пользователя страница 97

Страница: 97 / 111

Chapter 5 BIOS

5.7 Exit

Use the

Exit

menu (

BIOS Menu 23

) to load default BIOS values, optimal

failsafe values and to save configuration changes.

BIOS Menu 23: Exit



Save Changes and Reset

Use the

Save Changes and Reset

option to save the changes made to the

BIOS options and reset the system.



Discard Changes and Reset

Use the

Discard Changes and Reset

option to exit the system without saving

the changes made to the BIOS configuration setup program.



Restore Defaults

Use the

Restore Defaults

option to load the optimal default values for each of

the parameters on the Setup menus.

F3 key can be used for this operation.



Save as User Defaults

Use the

Save as User Defaults

option to save the changes done so far as

user defaults.



Restore User Defaults

Use the

Restore User Defaults

option to restore the user defaults to all the

setup options.

Содержание AESQ67-967
















































































































Результаты поиска

Содержание AESQ67-967

Отзывы:

Похожие инструкции для AESQ67-967

Бренды по названию

Популярные бренды

Nematron AESQ67-967, Руководство пользователя

Результаты поиска

Содержание AESQ67-967

Отзывы:

Похожие инструкции для AESQ67-967

Бренды по названию

Популярные бренды