NELSON
™
HEAT TRACING SYSTEMS
INSTALLATION
PLT-BC
STANDARD POWER CONNECTION KIT
INSTRUCTIONS
OVERJACKET PRODUCTS
P.O. BOX 726 TULSA, OK 74101 TEL 918-627-5530 FAX 918-641-7336 www.nelsonheaters.com
GA-1859 Rev. 6
Sheet 4 of 8
October 2006
127mm (5")
Lightly cut around heater overjacket 127mm (5")
from the end. Bend cable to break overjacket.
Lightly cut overjacket up the center between first
cut mark and the cable end. Bend cable to break
overjacket.
Remove overjacket from heater cable.
Move braid back toward the overjacket, creating
a bulge.
At the bulge, separate the braid to make an opening.
While bending the heater cable, work it through the
braid opening.
114mm (4.5")
Pull the braid tight.
Proceed to
“LT, CLT & HLT Products”
on sheet 5.
DO NOT CUT BRAID
WARNING:
!
