3.-The second option if you have an F3 Limited, this same rubber boot is plugged in to the trunk under
the front lower side of the trunk. Simply plug the wires in the boot from the trunk and use the Y-
Adapter we supply. Plug the wire adapter males terminals into the wiring hardness boot that’s shown
above and then the Y-Ends plug into the rear trunk wires to reconnect the trunk power and the other
end of the Y-Ends to your new USB Power Dock.
This Factory Wires in the boot above are fused so no need to add an additional one.
Once this is completed your rear 12 volt USB power outlet is installed. Start the F3 and make sure the
blue led light lights up verifying power on the USB socket.
Remember this is only waterproof if you close the rubber cap during rain. Unplug any USB cable
during rain and close rubber cap.
We thank you for purchasing one of our 12-volt power stations. We know today the needs for 12-volt
power for accessories and we have solved that demand with a stylish system that compliments the
design of your F3 Spyder®!
spyderextras.com