Nellcor OXIMAX N-600X Series Скачать руководство пользователя страница 86

Страница: 86 / 212

Using Monitor Trend Data

N-600x Operator’s Manual

Reading the Trend Data Display

The following table identifies the components of the trend data
display.

Table 7: Reading Trend Display

Item

Description

Amount of trend data displayed on the screen. Settings available
are 20 and 40 seconds, 15 and 30 minutes, 1, 2, 4, 8, 12, 24, 36,
and 48 hours.

Date represented by the cursor (item 5).

No trend data recorded during this time.

Time represented by the cursor (item 5).

Cursor

can be moved left or right using the ADJUST UP

(right) or ADJUST DOWN (left) buttons.

Highest and lowest reading at the cursor position.

Trend data that is being displayed (%SPO2, BPM, or PAU
[pulse amplitude units]).

Содержание OXIMAX N-600X Series





















































































































































































































Результаты поиска

Содержание OXIMAX N-600X Series

Отзывы:

Nellcor OXIMAX N-600X Series, Руководство оператора, Страница: 86 / 212

Результаты поиска

Содержание OXIMAX N-600X Series

Отзывы: