Nellcor OXIMAX N-600X Series, Руководство оператора

Страница: 77 / 212

Using the Monitor
N-600x Operator’s Manual 69
4. Use the ADJUST UP or ADJUST DOWN buttons to select the
desired language.
5. Press the EXIT softkey.
Note : The selected language displays until the monitor is turned OFF.
The selected language can be set as a default by qualified service
personnel by following the procedures outlined in the
N-600x Service
Manual .
O
XI
M
AX
Sensor Messages
O
XI
M
AX
sensor messages consist of sensor adjust condition messages
and sensor adjust messages which, when enabled, are displayed when
the monitor is not able to display saturation. When
O
XI
M
AX
sensor
messages are displayed, it is an indication that the O
XI
M
AX
sensor is
functioning properly, but the site to which the O
XI
M
AX
sensor applies
or the application method is not optimal for calculating %SpO
2
.
Condition messages are followed by action messages. Up to three
condition messages may be displayed on the “POOR SIGNAL
CONDITION” display in priority order, highest on top. The condition
display may be dismissed by using the EXIT softkey. Once closed,
the
O
XI
M
AX
sensor message screen will not return until a new
condition occurs.