NEFF U14M62 0GB Series, Инструкция по эксплуатации, Страница: 6 / 24

6
Before using the appliance for the first time
In this section, you can read about
■
How to set the clock after connecting up your appliance
■
How to clean your appliance before using it for the first time
Setting the clock
Note:
When you press the
KJ
clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹
:
‹‹
flashes in the clock display.
1.
Briefly press the
KJ
clock function button to go to the
setting mode.
The
KJ
and
3
symbols light up.
‚ƒ
:
‹‹
appears in the
clock display.
2.
Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the
KJ
clock function
button repeatedly until the KJ and 3 symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1.
Remove any accessories and residual packaging from both
cooking compartments.
2.
Clean the accessories and cooking compartments with hot
soapy water (see section: Cleaning and care).
3.
Heat the at 270 °C using Full-surface grill and the bottom
oven at 240 °C using CircoTherm for 30 minutes.
4.
Once the cooking compartments have cooled, wipe them out
with hot soapy water.
5.
Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
Switching on the appliance
1.
Turn the operating mode selector for the õ bottom oven or
for the
ô
top oven clockwise until the desired operating
mode is selected.
2.
Turn the corresponding temperature selector clockwise, until
the desired temperature is selected.
The corresponding
r
indicator lamp lights up while the oven
is heating up and during any subsequent heating.
Switching off the appliance
1.
Turn the operating mode selector back to the
Û
position.
2.
Turn the temperature selector back to the
Ú
position.
After the appliance is switched off, the cooling fan may
continue to run.
Electronic clock
In this section, you can read about
■
how to set the timer
■
how to switch your appliance off automatically (cooking time
and end of operation)
■
how to switch your appliance on and off automatically (preset
operation)
■
how to set the time
Clock display
&ORFNIXQFWLRQEXWWRQ 5RWDU\VHOHFWRU