Cleaning and servicing
en
21
Indicator
Setting
Value
Setting for whether and how the fan is to run on
after switching off the hob.
Fan run-on
– Fan switches off when the hob is switched off
– Switched on with standard fan run-on
– No change to the settings
1
– Switched on in automatic mode
2
The lighting switches itself on when the hob is
switched on.
Switching the lighting on automatically
– Switched off
1
– Switched on
The lighting switches itself off when the hob is
switched off.
Switching the lighting off automatically
1
– Switched off
– Switched on
1
Factory setting
2
Depending on the appliance specifications
25 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
25.1 Cleaning products
You can obtain suitable cleaning products and glass
scrapers from customer service, a retailer or the online
shop www.neff-international.com.
ATTENTION!
Unsuitable cleaning products may damage the sur-
faces of the appliance.
▶
Never use unsuitable cleaning products.
▶
Do not use cleaning products while the hob is still
hot. This may cause marks on the surface.
Unsuitable cleaning products
¡
Undiluted detergent
¡
Detergent intended for dishwashers
¡
Abrasive cleaning products
¡
Aggressive cleaning products such as oven spray
or stain remover
¡
Abrasive sponges
¡
High-pressure or steam jet cleaners
25.2 Cleaning the hob
Clean the hob after every use to stop cooking residues
from getting burnt on.
Requirement:
The hob must be cold. Do not allow the
hob to cool down if it has sugar stains, rice starch,
plastic or aluminium foil on it.
1.
Remove heavy soiling using a glass scraper.
2.
Clean the hob with a cleaning agent for glass
ceramic.
Follow the cleaning instructions on the packaging of
the cleaning agent.
Tips
¡
You can achieve good cleaning results using a
special sponge for glass ceramic.
¡
If you keep the base of the cookware clean, the
hob surface remains in a good condition.
25.3 Cleaning profiles
Clean the profiles if they are dirty or stained after use.
Note:
Do not use a glass scraper.
1.
Clean using warm soapy water and a soft cloth.
Wash new sponge cloths thoroughly before use.
2.
Dry with a soft cloth.
Note:
If there are replaceable side profiles, wear pro-
tective gloves when removing them.
25.4 Cleaning TwistPad®
The rotary knob consists of two parts, which you can
easily remove for a more thorough clean.
Recommended cleaning:
¡
Wipe the parts with warm soapy water and a cloth.
¡
Dry the parts thoroughly before reassembling.
Non-recommended cleaning:
¡
Do not use abrasive or corrosive products, such as
citric acid, vinegar, aggressive cleaning agents or
glass ceramic cleaners.
¡
Do not clean it in the dishwasher or immerse it in
water, as this may damage it.
¡
Do not use the glass scraper.
¡
Do not use stainless steel care products.
