en
PowerTransfer
14
16 PowerTransfer
You can use this function to transfer the power level
and the programmed cooking time from one cooking
zone to another.
16.1 PowerTransfer
Requirement:
Move the cookware to a cooking zone
which is not switched on, which you have not yet pre-
set and on which no other cookware has been previ-
ously placed.
1.
Move the cookware.
a
The cookware is detected.
a
flashes in the new cooking zone display.
2.
In order to implement the settings, use the rotary
knob to select the new cooking zone.
a
The original cooking zone is set to .
a
The settings are transferred to the new cooking
zone.
Note:
If you place a new item of cookware on a differ-
ent cooking zone before you have confirmed the set-
tings, you can use this function for the new item of
cookware.
17 Frying Sensor
This function allows you to melt, prepare sauces, sauté,
deep fry or fry while keeping the temperature under
control.
Instead of constantly adjusting the power level during
cooking, select the required target temperature once at
the start. The sensors under the glass ceramic meas-
ure the temperature of the cookware and keep this
constant throughout the entire cooking process.
This function is available on all cooking zones marked
with this symbol .
Functions
Temperature
Tableware
Melting
70 - 80 ºC
Preparing
sauces
110 - 120 ºC
Frying
140 ºC
Frying
160 ºC
Frying
180 - 200 ºC
Frying
220 ºC
17.1 Recommended cookware
Special cookware has been developed for this function,
which delivers the best results.
Cookware
Recommended cooking
zone
Frying pan, 15 cm dia-
meter
Single cooking zone
Frying pan, 19 cm dia-
meter
Single cooking zone
Frying pan, 21 cm dia-
meter
Single cooking zone
Teppanyaki
Flex Zone
Grill
Flex Zone
The recommended cookware is available from cus-
tomer service, specialist retailers or our online shop
www.neff-international.com.
Note:
You can also use other cookware. Depending on
the composition of the cookware, the achieved temper-
ature may differ from the selected temperature level.
17.2 Switching on the Frying Sensor
1.
Place the empty cookware on a cooking zone.
2.
Select the cooking zone.
3.
Press .
a
, and the preset temperature light up in the dis-
play for the selected cooking zone.
4.
Use the rotary knob to select the required temperat-
ure.
a
flashes on the control panel until the set temperat-
ure is reached.
a
The selected temperature and the development of
the temperature reached in the pan flash alternately
until the selected temperature has been reached.
