background image

en

    Operating the appliance

12

1

Operating the appliance

Operating the appliance

This chapter explains how to set a hotplate. The table 

shows heat settings and cooking times for various 

meals.

Switching the hob on and off

The main switch is used to switch the hob on and off.
To switch on: Touch the 

#

 symbol. The display above 

the main switch lights up. The hob is ready to use.
To switch off: Touch the 

 symbol until the display 

above the main switch goes out. All hotplates are 

switched off. The residual heat indicator remains lit until 

the hotplates have cooled down sufficiently.

Notes

The hob will automatically switch itself off if the 

cooking zones have been switched off for a few 

seconds.

The settings are stored for 4 seconds after the hob 

has been switched off. If you switch the hob back on 

during this time, the hob will operate using the 

stored settings.

Setting a hotplate

Set the required heat setting using the twist knob. 
Heat setting 1 = lowest setting. 
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is 

marked with a dot.

Notes

To protect the fragile parts of your appliance from 

overheating and electrical overloading, the hob may 

temporarily reduce the power.

In order to prevent the appliance from producing 

excess noise, the hob may temporarily reduce the 

power.

Selecting a hotplate and heat setting

The hob must be switched on.

1.

Select the hotplate. To do this, touch the twist knob 

in the appropriate area for the required hotplate.

2.

Turn the twist knob until the required heat setting 

appears in the heat setting display.

The heat setting is set.

Changing the heat setting

Select the hotplate and change the heat setting using 

the twist knob.

Switching off the hotplate

Select the hotplate and turn the twist knob until 

 

appears. The hotplate switches itself off and the 

residual heat indicator lights up.

Notes

If no pan has been placed on the hotplate, the 

selected power level flashes. After a certain time has 

elapsed, the hotplate switches off.

If a pan has been placed on the hotplate before 

switching on the hob, it will be detected within 

20 seconds of pressing the main switch and the 

hotplate will be selected automatically. Once 

detected, select the power level within the next 

20 seconds or the hotplate will switch off.

If more than one pan is placed on the hob, only one 

will be detected when switching it on.

Chef's recommendations

Recommendations

When heating up puree, cream soups and thick 

sauces, stir occasionally.

Set heat setting 8 to 9 for preheating.

When cooking with the lid on, turn the heat setting 

down as soon as steam escapes between the lid 

and the cookware. Steam does not need to escape 

for a good cooking result.

After cooking, keep the lid on the cookware until you 

serve the food.

To cook with the pressure cooker, observe the 

manufacturer's instructions.

Do not cook food for too long, otherwise the 

nutrients will be lost. The kitchen clock can be used 

to set the optimum cooking time.

For a more healthy cooking result, smoking oil 

should be avoided.

To brown food, fry small portions in succession.

Cookware may reach high temperatures while the 

food is cooking. We recommend that you use oven 

gloves.

You can find recommendations for energy-efficient 

cooking in section 

~

 "Environmental protection"

Содержание T68PT6QX0









































Отзывы: