Home Connect
en
33
Settings via app
Using the Home Connect app, you can easily access
the basic settings for your hob and send settings for the
cooking zones to the hob.
Notes
■
Before you can change the basic settings, the hob
must be switched off.
■
If the appliance is being operated by means of the
controls on the appliance itself, this mode of
operation always has priority. During this time, it is
not possible to operate the appliance using the
Home Connect app.
■
The appliance is supplied with the settings
transmission option activated.
■
If the settings transmission option has been
deactivated, only the hob's operating statuses will be
displayed in the Home Connect app.
1.
Touch the
0
sensor and then select
option
4
MyProfile, to open the basic settings.
2.
Touch the "Home Connect" setting.
3.
Touch "Settings via app".
4.
To activate the settings transmission option, touch
"Yes"; to deactivate the settings transmission option,
touch "No".
Confirming settings
Once cooking settings have been successfully
transmitted to a cooking zone, a message will appear
on the hob. You will be asked whether you want to use
these settings. To confirm that you want to use these
settings, touch "Accept settings". To reject these
settings, touch "Discard".
Software update
Using the software update function, your hob's software
can be updated (e.g. for the purpose of optimisation,
troubleshooting or security updates). To do this, you
need to be a registered Home Connect user, have
installed the app on your mobile device and be
connected to the Home Connect server.
As soon as a software update is available, you will be
informed by the Home Connect app and will be able to
start the software update via the app or on the hob. To
do this, open the basic settings for your hob.An
assistant will appear to guide you through the update.
Once the update has been successfully downloaded,
you can start installing it via the Home Connect app if
you are on your local area network.
The Home Connect app will inform you once installation
is complete.
Notes
■
You can continue to use your hob as normal while
updates are downloading.
■
Depending on your personal settings in the app,
software updates can also be set to download
automatically.
■
We recommend that you install security updates as
soon as possible.
About data protection
When your appliance is connected for the first time to a
WLAN network, which is connected to the Internet, your
appliance transmits the following categories of data to
the Home Connect server (initial registration):
■
Unique appliance identification (consisting of
appliance codes as well as the MAC address of the
installed WiFi communication module).
■
Security certificate of the WiFi communication
module (to ensure a secure IT connection).
■
The current software and hardware version of your
domestic appliance.
■
Status of any previous resetting to factory settings.
This initial registration prepares the Home Connect
functions for use and is only required when you want to
use these Home Connect functions for the first time.
Note:
Ensure that the Home Connect functions can be
used only in conjunction with the Home Connect app.
Information on data protection can be accessed in the
Home Connect app.
+RPH&RQQHFW
&RQQHFWWRDSS
:L)L
&RQILJXUHVHWWLQJVYLDDSS
'LVFDUG
:RXOG\RXOLNHWR
DSSO\WKHVHVHWWLQJVWRWKH
VHOHFWHGFRRNLQJ]RQH"
$FFHSW
&RQILJXUHVHWWLQJVYLDDSS