NEFF T58 T2 Series, Инструкция по эксплуатации

Страница: 11 / 32

Operating the appliance
en
11
Operating the hob without the twist knob
The hob can also be operated without the twist knob:
1.
Switch on the hob using the main switch.
2.
Within the next 5 seconds, simultaneously touch and
hold the
œ
and
.
symbols for 4 seconds. An
audible signal will sound.
3.
Touch the
.
symbol repeatedly until the indicator for
the required hotplate lights up.
4.
Then set the required heat setting using the
œ
or
x
symbol.
The hotplate has now been activated.
Notes
■
The timer function cannot be activated without the
twist knob.
■
The twist knob can be placed back on the twistpad
at any time.
1
Operating the appliance
Operating the appliance
This chapter explains how to set a hotplate. The table
shows heat settings and cooking times for various
meals.
Switching the hob on and off
The main switch is used to switch the hob on and off.
To switch on: Touch the
#
symbol. The display above
the main switch lights up. The hob is ready to use.
To switch off: Touch the
# symbol until the display
above the main switch goes out. All hotplates are
switched off. The residual heat indicator remains lit until
the hotplates have cooled down sufficiently.
Notes
■
The hob switches off automatically if all hotplates
have been switched off for more than 15 seconds.
■
The selected settings are stored for four seconds
after the hob has been switched off. If the hob is
switched on again within this time, the previous
settings are applied.
Setting a hotplate
Set the required heat setting using the twist knob.
Heat setting 1 = lowest setting.
Heat setting 9 = highest setting.
Every heat setting has an intermediate setting. This is
marked with a dot.
Notes
■
To protect the fragile parts of your appliance from
overheating and electrical overloading, the hob may
temporarily reduce the power.
■
In order to prevent the appliance from producing
excess noise, the hob may temporarily reduce the
power.
Selecting a hotplate and heat setting
The hob must be switched on.
1.
Select the hotplate. To do this, touch the twist knob
in the appropriate area for the required hotplate.
2.
Turn the twist knob until the required heat setting
appears in the heat setting display.
The heat setting is set.