NEFF T48FD23X2, Инструкция по эксплуатации

Страница: 14 / 28

en
Time-setting options
14
Activation
1.
Select one of the two hotplates assigned to the
Move function.
2.
Touch the
ý
symbol. The
ò
indicator lights up.
The heat settings light up on the displays for each of
the two hotplates.
The function has now been activated.
Notes
■
The display for the hotplate with the cookware lights
up more brightly.
■
The
¬
indicator lights up on the display for the
hotplate that is still selected.
Changing the heat setting
Select one of the two hotplates assigned to the Move
function and use the
@
or
A
symbol to set the heat
setting.
Note:
If the function is deactivated, the heat settings
return to the preset values
Deactivation
Touch the
ý
symbol.
This deactivates the function.
Note:
When one of the two hotplates is set to
‹
, the
function is deactivated within approx. 10 seconds.
O
Time-setting options
Time-setting options
Your hob has two timer functions:
■
Programming the cooking time
■
Kitchen timer
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1.
Select the hotplate and the required heat setting.
2.
Touch the 0 symbol. x lights up on the display for
the hotplate. ‹‹ lights up on the timer display.
3.
Touch the @ or A symbol. The basic setting
appears:
@
symbol: 30 minutes.
A
symbol: 10 minutes.
4.
Use the
@
or
A
symbol to select the required
cooking time.
After a few seconds, the time begins to elapse.
Notes
■
The same cooking time can be set automatically for
all hotplates. The set time for each of the hotplates
counts down independently from the others.
You can find information on automatically
programming the cooking time in section
~
"Basic
settings"
■
If the Combi Zone or Move function is selected for
the combined hotplate, the set time for both
hotplates is the same.