NEFF T4 D7B Series, Инструкция по эксплуатации

Страница: 16 / 36

en
CombiZone function
16
w
CombiZone function
CombiZone function
You can use this function to connect the Combi zone
and set the same heat setting for both cooking zones.
This is especially suitable for cooking with oblong
cookware.
Notes regarding cookware
For best results, use cookware that matches the size of
the two cooking zones. Place the cookware in the
centre of the cooking zones.
If you are using only one piece of cookware on one of
the two cooking zones, you can move it to the second
cooking zone. If you do this, the heat setting and the
selected settings are transferred.
Activation
The hob must be on.
1.
Select one of the two hotplates in the combi zone
and set the heat setting.
2.
Touch the
þ
symbol. The
ó
indicator lights up.
The heat setting lights up on the displays for the two
hotplates.
The function has now been activated.
Changing the heat setting
Select one of the two hotplates assigned to the combi
zone and use the @ or A symbol to set the heat
settings.
Deactivation
Select one of the two hotplates assigned to this function
and touch the
þ
symbol.
This deactivates the function. The two hotplates will now
function independently.
O
Time-setting options
Time-setting options
Your hob has two timer functions:
■
Programming the cooking time
■
Kitchen timer
Programming the cooking time
The hotplate automatically switches off after the time
that is set has elapsed.
Setting procedure:
1.
Select the hotplate and the required heat setting.
2.
Touch the 0 symbol. x lights up on the display for
the hotplate. ‹‹ lights up on the timer display.
3.
Touch the @ or A symbol. The basic setting
appears:
@
symbol: 30 minutes.
A
symbol: 10 minutes.
4.
Use the
@
or
A
symbol to select the required
cooking time.
After a few seconds, the time begins to elapse.
Notes
■
The same cooking time can be set automatically for
all hotplates. The set time for each of the hotplates
counts down independently from the others.
You can find information on automatically
programming the cooking time in section
~
"Basic
settings"
■
If the Combi Zone or Move function is selected for
the combined hotplate, the set time for both
hotplates is the same.
Frying sensor
If a cooking time has been programmed for a hotplate
and the frying sensor has been activated, the cooking
time will not begin to count down until the selected
temperature setting has been reached.
Changing or deleting the time
Select a hotplate. Touch the
0
symbol and use the
@
or
A
symbols to change the cooking time, or set the
time to
‹‹
.