NEFF T16 D56 Series, Инструкция по применению

Страница: 30 / 56

en
Environmental protection and saving energy
30
Damage Cause Measure
Scratch
es
Salt, sugar or
sand
Do not use the hob as a
work surface or storage
space.
Scratch
es
Rough pot or
pan bases
Check your cookware.
Discol-
ouration
Unsuitable
cleaning
products
Only use cleaning
products that are suitable
for glass ceramic.
Damage Cause Measure
Discol-
ouration
Pan abrasion,
e.g. aluminium
Lift pots and pans to
move on the hob.
Blisters Sugar or food
with a high
sugar content
Remove boiled-over food
immediately with a glass
scraper.
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
▶
Sort the individual components by type and dispose
of them separately.
3.2 Saving energy
If you follow these instructions, your appliance will use
less energy.
Select the cooking zone to match the size of your
pan. Centre the cookware on the hob.
Use cookware whose base diameter is the same dia-
meter as the hotplate.
Tip: Cookware manufacturers often give the upper
diameter of the saucepan. It is often larger than the
base diameter.
¡
Unsuitable cookware or incompletely covered cook-
ing zones consume a lot of energy.
Cover saucepans with suitable lids.
¡
Cooking without a lid consumes considerably more
energy.
Lift lids as infrequently as possible.
¡
When you lift the lid, a lot of energy escapes.
Use a glass lid.
¡
You can see into the pan through a glass lid
without having to lift it.
Use pots and pans with flat bases.
¡
Uneven bases increase energy consumption.
Use cookware that is suitable for the quantity of food.
¡
Large items of cookware containing little food need
more energy to heat up.
Cook with only a little water.
¡
The more water that is contained in the cookware,
the more energy is required to heat it up.
Turn down to a lower power level early on.
¡
If you use an ongoing power level that is too high,
you will waste energy.
Take advantage of the hob's residual heat. With
longer cooking times switch off the hotplate
5-10 minutes before the end of cooking.
¡
Unused residual heat increases energy consump-
tion.
Product Information according (EU) 66/2014 can be
found on the attached appliance pass and online on
the product page for your appliance.