aus
Cleaning and servicing
38
Run Easy Clean without tableware if
the indicator for Easy Clean lights up
on the control panel or if advised to
do so by the display. The indicator
will go out after you have run Easy
Clean. If your appliance does not
have a reminder function, we recom-
mend performing Machine Care
every 2 months.
Running Easy Clean
Run the Easy Clean programme if the
indicator for Easy Clean lights up on
the control panel or if advised to do
so by the display.
Notes
¡
Run the Easy Clean programme
without any tableware in the dish-
washer.
¡
Only use machine care products
and machine cleaners specially
designed for dishwashers.
¡
Make sure that there are no alu-
minium parts, e.g. extractor hood
grease filters or aluminium pans, in
the interior of the appliance.
¡
If you have not run Easy Clean
after 3 washing cycles, the indic-
ator for Easy Clean will go out
automatically.
¡
For optimum cleaning perform-
ance, ensure the correct place-
ment of cleaners.
¡
Follow the safety instructions given
on the packagings of the machine
care products and machine clean-
ers.
1.
Remove any coarse soiling in the
interior with a damp cloth.
2.
Clean the filters.
3.
Place the machine care product in
the appliance interior.
Only use machine care products
specially designed for dishwash-
ers.
4.
Pour the machine cleaner into the
detergent dispenser until it is filled
completely.
Do not place any additional ma-
chine cleaner in the appliance in-
terior.
5.
Press
.
6.
Press
.
a
Easy Clean is run.
a
Once the programme has ended,
the indicator for Easy Clean goes
out.
Filter system
The filter system removes coarse
soiling from the dishwashing cycle.
1
2
3
1
Micro filter
2
Fine filter
3
Coarse filter
Cleaning filters
Soiling in the dishwashing water may
block the filters.
1.
After each wash check the filters
for residue.
