NEFF S353ITX02G, Руководство пользователя

Страница: 21 / 52

Before using for the first time
en
21
Removing baking sheet spray head
If you no longer require the baking
sheet spray head, remove it from the
appliance.
1.
Turn the baking sheet spray head
anticlockwise and remove from the
holder.
2.
Insert the top basket in the appli-
ance.
Before using for the first time
Before using for the
first time
Before using for the first time
Configure the settings for initial start-
up.
Performing the initial config-
uration
On initial start-up or after a reset to
the factory settings, you will need to
make settings.
Requirement: "The appliance has
been installed and connected."
→
Page 11
1.
"Add special salt." → Page 22
2.
"Add rinse aid." → Page 24
3.
"Switch on the appliance."
→
Page 29
4.
"Setting the water softening sys-
tem." →
Page 22
5.
"Set the amount of rinse aid to be
dispensed." →
Page 24
6.
"Add detergent" → Page 25 .
7.
Start the Programme with the
highest cleaning temperature
without tableware.
To remove any marks from water
or other residues, we recommend
you operate the appliance without
tableware before using it for the
first time.
Tip:
You can change these settings
and other "Basic settings"
→
Page 32 at any time.
Water softening system
Water softening system
Water softening system
Hard water leaves limescale on the
tableware as well as the washing
tank and parts of the appliance may
become blocked.
To ensure good dishwashing results,
you can treat the water with special
salt and the water softening system.
To avoid damage to the appliance,
water with a hardness above 9 °E
must be softened.
Overview of water hardness settings
You can find an overview of the water hardness values that can be selected
here.
You can find out how hard your water is from your local water company or by
using a water hardness tester.
Water hard-
ness value
°E Hardness
range mmol/l Setting "LED A"
→ Page 15
"LED B"
→ Page 15
"LED C"
→ Page 15
0 - 8 Soft 0 - 1.1 0
9 - 20 Medium 1.2 - 2.9 1
21 - 26 Hard 3.0 - 3.7 2