NEFF N90 T68 S6 Series, Инструкция по эксплуатации

Страница: 31 / 40

Energy consumption indicator
en
31
[
Energy consumption
indicator
Energy consumption indicator
This function indicates the total amount of energy
consumed by this hob the last time it was used for
cooking.
Once the hob is switched off, the energy consumption
is displayed in kilowatt hours (e.g. ‚ . ‹‰ kWh) for 10
seconds.
The accuracy of the information displayed depends on
the voltage quality of the mains power supply, among
other factors.
You can find out how to switch this function on in the
section on
~
"Basic settings"
t
Cookware check
Cookware check
This function can be used to check the speed and
quality of the cooking process depending on the
cookware.
The result is a reference value and depends on the
properties of the cookware and the hotplate being used.
1.
With the cookware still cold, fill it with approx.
200 ml of water and place it on the centre of the
hotplate with the diameter that most closely matches
that of the base of the cookware.
2.
Go to the basic settings and select the
™‚ ƒ
setting.
3.
Turn the twist knob.
b
flashes on the hotplate
displays.
The function is activated.
After 10 seconds, information on the quality and speed
of the cooking process appears in the hotplate displays.
Check the result using the following table:
To reactivate the function, turn the twist knob.
Notes
■
The flexible cooking zone only counts as a single
hotplate; place no more than one item of cookware
on it.
■
If the diameter of the hotplate used is much smaller
than the diameter of the cookware, only the middle
of the cookware can be expected to heat up. This
may result in the cooking results not being as good
as expected or being less than satisfactory.
■
You can find information on this function in the
section on
~
"Basic settings" .
■
You can find information on the type, size and
positioning of the cookware in the sections on
~
"Induction cooking" and
~
"Flex Zone" .
Result
‹
The cookware is not suitable for the hotplate and will therefore
not heat up.*
‚
The cookware is taking longer to heat up than expected and the
cooking process is not going as well as it should.*
ƒ
The cookware is heating up correctly and the cooking process
is going well.
* If there is a smaller hotplate available, test the cookware again on the
smaller hotplate.