NEFF N70 KB7966 Series, Инструкция по применению, Страница: 19 / 36

Home Connect en
19
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
1
)
and to the Home Connect app.
After switching on the appliance, wait
at least 3 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
Tip: Please also follow the instruc-
tions in the Home Connect app.
Notes
¡
Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 4
¡
Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Setting up the
Home Connect app
1.
Install the Home Connect app on
your mobile device.
2.
Start the Home Connect app and
set up access for Home Connect.
The Home Connect app guides
you through the entire login pro-
cess.
10.2 Setting up Home Con-
nect
Requirements
¡
The Home Connect app has been
installed on your mobile device.
¡
The appliance is receiving signals
from the WLAN home network (Wi-
Fi) at its installation location.
1.
Open the Home Connect app and
scan the following QR code.
RF
SM0
Z0
1
2.
Follow the instructions in the
Home Connect app.
10.3 Switching on the con-
nection to the WLAN
home network (Wi-Fi)
▶ Press .
10.4 Switching off the con-
nection to the WLAN
home network (Wi-Fi)
▶
Press .
10.5 Installing updates for the
Home Connect software
Note: If an update of the Home Con-
nect software is available, a message
appears in the Home Connect app.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.