en
Customer service
10
4
Customer service
Customer
service
When calling us, please give the product number (E
no.) and the production number (FD no.) so that we can
provide you with the correct advice. The rating plate
with these numbers can be found inside the appliance
(remove the metal mesh grease filter to gain access).
You can make a note of the numbers of your appliance
and the telephone number of the after-sales service in
the space below to save time should it be required.
Please be aware that a visit by an after-sales engineer
will be charged if a problem turns out to be the result of
operator error, even during the warranty period.
Please find the contact data of all countries in the
enclosed customer service list.
To book an engineer visit and product advice
Rely on the professionalism of the manufacturer. You
can therefore be sure that the repair is carried out by
trained service technicians who carry original spare
parts for your appliances.
Accessories for circulating-air mode
(not included in the delivery)
Notes
■
Follow the installation instructions supplied with the
accessories.
■
For appliances with an additional internal filter, only
the CleanAir recirculation module can be used.
Basic equipment: Starter set for circulating-air mode -
narrow
Throw-away filter
Basic equipment: Starter set for circulating-air mode -
wide
Throw-away filter
Basic equipment: CleanAir recirculation module -
narrow
Throw-away filter
Basic equipment: CleanAir recirculation module - wide
Throw-away filter
E no.
FD no.
After-sales service
O
GB
0344 892 8989
Calls charged at local or mobile rate.
IE
01450 2655
0.03 € per minute at peak. Off peak 0.0088 €
per minute.
1
2
3
4
5
6
7
8
1
Z5105X5 channel width 260 mm
2
Z5101X1 channel width 260 mm
3
Z5106X5 channel width 345 mm
4
Z5102X1 channel width 345 mm
5
Z5280X0 channel width 260 mm
6
Z5170X1 channel width 260 mm
7
Z5286X0 channel width 345 mm
8
Z5170X1 channel width 345 mm
[
[
[
[
