NEFF D99L20N0, Инструкция по эксплуатации, Страница: 7 / 12

7
Operating the appliance
Note: Switch on the extractor hood when you start cooking and
switch it off again several minutes after you have finished
cooking. This is the most effective way of removing the kitchen
fumes.
Setting the fan
Note: Always adjust the fan strength to meet current conditions.
If there is a large build-up of steam or fumes, select a high fan
setting.
Switching on
■
Press the
#
button.
The fan starts at setting 2.
■
Press the + or - button to change the fan strength.
Switching off
Press the
#
button.
Intensive setting
You can use the intensive setting if there is a large build-up of
odours and fumes/vapours.
There are two different intensive settings available:
˜‚
- duration: 5 minutes
˜ƒ
- duration: 10 minutes
■
Press the + button while the appliance is at ventilation setting
„ .
The intensive setting ˜‚ is activated.
■
Press the + button again to activate the intensive setting ˜ƒ .
Once the preset time has elapsed, the electronics automatically
switch the appliance back down to ventilation setting
ƒ
. If you
wish to end the intensive setting before the preset time expires,
press the - button until the required setting is reached.
Fan run-on time
Press the
$
button.
% and « appear in the display.
The run-on time is six minutes. Once this time has elapsed,
ventilation switches off automatically. If the lighting is switched
on, it remains on.
Setting the run-on time
During the fan run-on time, press the + or - buttons.
You can set the following run-on times:
Display
¬ : three minutes
Display « : six minutes
Display
ª
: nine minutes
Interval ventilation
With "interval ventilation", the ventilation switches on
automatically for five minutes each hour.
■
To switch on interval ventilation, press the $ button twice.
This operating mode is indicated by the $ symbol in the
display.
■
To switch off interval ventilation, press the # button.
Lighting
The lighting can be switched on and off independently of the
ventilation.
Press the
A
button.
Setting the brightness
Press and hold the A button until the desired brightness is
reached.
Audible signal
Switching off the audible signal
With the fan switched off, press and hold the
#
and + buttons
for approx. three seconds.
An acknowledgement signal sounds.
Switching on the audible signal
Repeat the "Switching off the audible signal" process.
Cleaning and maintenance
:
Risk of burns!
The appliance becomes hot during operation. Allow the
appliance to cool down before cleaning.
:
Risk of electric shock!
Penetrating moisture may result in an electric shock. Clean the
appliance using a damp cloth only. Before cleaning, pull out the
mains plug or switch off the circuit breaker in the fuse box.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of injury!
Components inside the appliance may have sharp edges. Wear
protective gloves.
Cleaning agents
Observe the information in the table to ensure that the different
surfaces are not damaged by using the wrong type of cleaning
agent. Do not use
■
harsh or abrasive cleaning agents,
■
cleaning agents with a high concentration of alcohol,
■
hard scouring pads or sponges,
■
high-pressure cleaners or steam cleaners.
Wash new sponge cloths thoroughly before use.