NEFF D96BMV5N5B, Инструкция по установке и эксплуатации

Страница: 9 / 24

Connecting to a hob
en
9
e
Connecting to a hob
Connecting to a hob
You can connect this appliance to a hob and then
control the functions of the hood via your hob.
Appliances can be connected to each other in different
ways:
Connecting appliances directly
If the appliance is connected directly to a hob, it cannot
be connected to your home network as well. The
appliance works like an extractor hood that is not
connected to the network and you can continue to
operate it via the control panel.
Connecting appliances via your home network
You can connect the appliance to the hob via your
home network and make use of the existing
infrastructure.
Notes
■
Make sure you follow the safety instructions in the
instruction manual for your extractor hood and that
these are complied with even when operating the
appliance via the hood controls on the hob.
■
Using the controls on the extractor hood always take
priority. It is not possible to use the hood controls on
the hob during this time.
Setting up a connection
To connect the hob to the extractor hood, the hood
must be switched on.
Make sure that the hob is switched on and is in search
mode.
To do this, refer to the section entitled "Connecting to
the extractor hood" in the instruction manual for your
hob.
Connecting directly
Notes
■
Before connecting the appliance, reset all existing
connections to the WiFi or other appliances.
■
If your extractor hood is connected directly to the
hob, it cannot be connected to your WiFi as well and
you will not be able to use Home Connect.
Press and hold the
#
and
˜
symbols at the same time
until the
D
and
Ù
indicators start flashing.
The extractor hood has been connected to the hob
when the
D
symbol stops flashing and remains
continuously lit.
Connecting via your home network
Notes
■
You require a router that has WPS functionality.
■
You require access to your router.
■
The extractor hood cannot be switched on during the
connection process. You can cancel the process at
any time by pressing the
#
symbol.
■
In the networked standby mode, your appliance
requires a maximum of 2 W.
1.
Press and hold the
#
and
˜
symbols at the same
time until the
D
and
Ù
indicators start flashing.
2.
Tap the + symbol to start automatic login to your
home network.
D
and
‚
will flash.
3.
Press the WPS button on the router within the next
2 minutes.
Once the connection to your home network has
been established, the extractor hood will connect to
the hob automatically.
D
and
„
will flash.
The connection process is complete when the
D
indicator stops flashing on the control panel and
remains continuously lit.
Note:
The connection can only be established when
both appliances are connected to your home network
and are in search mode. If the time allowed for search
mode has already expired for one of the two
appliances, start the search again.