en
Familiarising yourself with your appliance
6
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions
of your appliance and to obtain information about the
operating status.
Switching on fan setting 1
Switching on fan setting 2
Switching on fan setting 3
Switching the lighting on or off
6 Basic operation
6.1 Selecting a fan setting
Notes
¡
The appliance does not need to be switched on and
off separately.
¡
If more than one button has been pressed, the
highest selected fan setting always applies.
1.
Press to set fan setting 1.
2.
Press to set fan setting 2.
3.
Press to set fan setting 3.
6.2 Switching on the lighting
The lighting can be switched on and off independently
of the ventilation system.
▶
Press .
7 Cleaning and servicing
To keep your appliance working efficiently for a long
time, it is important to clean and maintain it carefully.
7.1 Cleaning the appliance
Clean the appliance as specified. This will ensure that
the different parts and surfaces of the appliance are
not damaged by incorrect cleaning or unsuitable clean-
ing products.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic cleaning agents
in conjunction with aluminium parts in the interior of the
appliance may cause explosions.
▶
Never use highly caustic alkaline or highly acidic
cleaning agents. In particular, do not use commer-
cial or industrial cleaning agents in conjunction with
aluminium parts, e.g. grease filter on extractor
hoods.
WARNING ‒ Risk of electric shock!
An ingress of moisture can cause an electric shock.
▶
Before cleaning, pull out the mains plug or switch
off the fuse in the fuse box.
▶
Do not use steam- or high-pressure cleaners to
clean the appliance.
WARNING ‒ Risk of burns!
The appliance becomes hot during operation.
▶
Allow the appliance to cool down before cleaning.
WARNING ‒ Risk of injury!
Components inside the appliance may have sharp
edges.
▶
Carefully clean the appliance interior.
1.
Observe the information regarding the cleaning
agents.
→
2.
Clean as follows, depending on the surface:
‒
Clean stainless steel surfaces in the direction of
the finish using a sponge cloth and hot soapy
water.
‒
Clean painted surfaces using a damp sponge
cloth and hot soapy water.
‒
Clean aluminium using a soft cloth and glass
cleaner.
‒
Clean plastic using a soft cloth and glass
cleaner.
‒
Clean glass using a soft cloth and glass cleaner.
3.
Dry with a soft cloth.
4.
Apply a thin layer of the stainless steel cleaning
product to stainless steel surfaces using a soft
cloth.
You can obtain stainless steel cleaning products
from the after-sales service or the online shop.
Содержание D62 Series
Страница 1: ...Extractor hood en User manual and installation instructions 2 D92 D62 D94 D64...
Страница 17: ......
Страница 18: ......
Страница 19: ......