NEFF C88FT38 0B Series, Инструкция по эксплуатации, Страница: 14 / 68

en
Before using for the first time
14
K
Before using for the first
time
Before using for the first time
Before you can use your new appliance, you must
make some settings. You must also clean the cooking
compartment and accessories.
Before using for the first time
Before using the appliance for the first time, ask your
water supplier about the hardness of your tap water.
To ensure that the appliance can reliably remind you to
descale it when required, you must set your water
hardness range correctly.
Caution!
■
The appliance may become damaged due to the
use of unsuitable liquids.
Do not use distilled water, highly chlorinated tap
water (>40 mg/l) or other liquids.
Only use cold, fresh tap water, softened water or
non-carbonated mineral water.
■
Malfunctions may occur when using filtered or
demineralised water.
The appliance may request that you top up the water
tank even though it may be full, or operation with
steam is cancelled after approx. two minutes.
If required, mix filtered or demineralised water with
the bottled non-carbonated mineral water with a ratio
of one to one.
Notes
■
If your water is very hard, we recommend that you
use softened water.
■
If you only use softened water, you can set the water
hardness range to "softened".
■
If you use mineral water, set the water hardness
range to "4 very hard".
■
If you use mineral water, you must only use non-
carbonated mineral water.
Opening and closing the appliance door
Opening the appliance door
Note:
The door handle will remain open if you do not
close it.
1.
Press the top of the door handle until it opens
(fig.
!
).
2.
Pull the door handle towards you until the appliance
door opens (fig.
"
).
Closing the appliance door
1.
Pull the door handle up until the appliance door
closes.
2.
Push the door handle down until it closes.
Initial use
As soon as the appliance is connected to the power
supply, the first setting "Language" appears on the
display.
Setting the language
1.
Touch the bottom line.
2.
Swipe to the left or right to select the required
language.
3.
Touch the top line.
Setting the time
1.
Touch "Clock".
2.
Touch the bottom line.
3.
Swipe to the left or right to select the current hour.
4.
Touch "Minutes".
5.
Swipe to the left or right to select the current minute.
6.
Touch the
8
symbol to apply the setting.
Setting the date
1.
Touch "Date".
2.
Touch the bottom line.
3.
Swipe to the left or right to select the current day.
4.
Touch "Month".
5.
Swipe to the left or right to select the current month.
6.
Touch "Year".
7.
Swipe to the left or right to select the current year.
8.
Touch the
8
symbol to apply the setting.
Water hardness range Setting
0 0 softened
1 (up to 1.3 mmol/l) 1 soft
2 (1.3 - 2.5 mmol/l) 2 medium
3 (2.5 - 3.8 mmol/l) 3 hard
4 (above 3.8 mmol/l) 4 very hard
2 1