NEFF C24MS71 0B Series, Руководство пользователя и инструкции по установке

Страница: 31 / 52

Disposal
en
31
Fault Cause and troubleshooting
The time is not dis-
played when the ap-
pliance is switched
off.
Basic setting has been changed.
▶
Change the basic setting for the clock.
→ "Basic settings", Page 20
Appliance door can-
not be opened.
The cleaning function locks the appliance door; ⁠ lights up in the display.
▶
Allow the appliance to cool down until goes out in the display.
→ "Pyrolytic self-cleaning cleaning function", Page 25
The childproof lock locks the appliance door.
▶
Deactivate the childproof lock using "Unlock".
→ "Childproof lock", Page 20
You can switch off the lock in the basic settings.
→ "Basic settings", Page 20
Home Connect is not
working properly.
Different causes are possible.
▶
Go to www.home-connect.com.
During simple mi-
crowave operation,
the cooking compart-
ment becomes hot.
The drying function is switched on.
▶
You can change the basic setting for the drying function during microwave operation.
→
"Basic settings", Page 20
‒
Observe the information on operating with microwave.
→
"Microwave", Page 14
The interior lighting
does not work.
Basic setting has been changed.
▶
Change the basic setting for the lighting.
→
"Basic settings", Page 20
The LED light is defective.
▶
Call the after-sales service.
→
"Customer Service", Page 32
A notification appears
on the display con-
firming that the max-
imum operating time
has been reached.
The maximum operating time has been reached. The appliance stops heating.
1. Press "OK" to confirm the notification about the maximum operating time.
2.
Check whether you still need the appliance.
▶
Set a cooking time so that the operation does not stop.
→
"Time-setting options", Page 17
The operation stops. The maximum operating time has been reached. The appliance stops heating.
1. Press to switch off the appliance.
2.
If necessary, press to switch the appliance back on and then restart the operation.
▶
Set a cooking time so that the operation does not stop.
→ "Time-setting options", Page 17
Error code made up
of letters and num-
bers appears on the
display, e.g. E0111.
The electronics have detected a fault.
1. Switch the appliance off and on again.
a
If the fault was a one-off, the message disappears.
2. If the message appears again, call the after-sales service. Please specify the exact error
message when calling.
→ "Customer Service", Page 32
The cooking result is
not satisfactory.
Settings were unsuitable.
Adjustment values, e.g. temperature or cooking time, depend on the recipe, quantity and
food.
▶
Next time, set lower or higher values.
Tip: A lot of other information about the food preparation and corresponding adjustment
values can be found in the Home Connect app or on our website www.neff-interna-
tional.com.
25 Disposal
25.1 Disposing of old appliance
Valuable raw materials can be reused by recycling.
1. Unplug the appliance from the mains.
2. Cut through the power cord.
3. Dispose of the appliance in an environmentally
friendly manner.
Information about current disposal methods are
available from your specialist dealer or local author-
ity.