NEFF B6ACH7A 0A Series, Руководство пользователя и инструкции по установке

Страница: 12 / 36

en
Childproof lock
12
Requirements
¡
The type of heating and temperature or setting are
set.
¡
A cooking time is set.
1. Press the ​⁠ button repeatedly until ​⁠ is highlighted
in the display.
2. Press the ​⁠ or ​⁠ button.
a
The display shows the calculated end time.
3. Use the ​⁠ or ​⁠ button to delay the end time.
a
After a few seconds, the appliance applies the set-
ting and the display shows the set end time.
a
Once the calculated start time has been reached,
the appliance starts heating up and the cooking
time starts counting down.
a Once the time has elapsed, an audible signal
sounds and the display shows the cooking time as
zero.
4.
When the cooking time has elapsed:
‒
Press any button to end the signal prematurely.
‒
To set another cooking time, press the ​⁠ button.
‒
When your food is ready, switch off the appli-
ance.
Changing the end time
In order to achieve a good cooking result, you can only
change the set end time before operation starts and
the cooking time starts counting down.
Requirement:
​⁠ is highlighted on the display.
▶
Use the ​⁠ or ​⁠ button to delay the end time.
a
The appliance applies the change after a few
seconds.
Cancelling the end time
You can delete the set end at any time.
Requirement:
​⁠ is highlighted on the display.
▶
Reset the end time to the current time plus the set
cooking time using the ​⁠ button.
a
After a few seconds, the appliance applies the
change and starts heating up. The cooking time
counts down.
8.5 Setting the time on the clock
Once the appliance has been connected to the mains
or following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:
The function selector must be set to the
"Off" position ​⁠.
1. Use the ​⁠ or ​⁠ button to set the time.
2.
Press the ​⁠ button.
a The time that is set appears on the display.
Tip:
You can go to the basic settings → Page 13 to
specify whether or not the time should be shown on
the display.
Changing the time on the clock
You can change the time on the clock at any time.
Requirement:
The function selector must be set to the
"Off" position ​⁠.
1. Press the ​⁠ button repeatedly until ​⁠ is highlighted
in the display.
2. Use the ​⁠ or ​⁠ button to change the time.
a
The appliance applies the change after a few
seconds.
9 Childproof lock
You can secure your appliance to prevent children
from accidentally switching it on or changing the set-
tings.
Note:
You can go to the basic settings → Page 13 to
specify whether you want the option to set the child-
proof lock.
You can only use the childproof lock to lock the control
elements of the appliance. In addition, you can lock the
appliance door.
→
"Basic settings", Page 13
9.1 Automatic childproof lock
When the appliance is switched off, it locks automatic-
ally. You need to pause the automatic childproof lock
before you switch on the appliance.
You can activate and deactivate the automatic child-
proof lock in the basic settings.
→
"Basic settings", Page 13
Pausing the automatic childproof lock
Requirement:
The automatic childproof lock is activ-
ated in the basic settings.
→
"Basic settings", Page 13
▶
Press and hold the ​⁠ button until ​⁠ goes out on
the display.
9.2 Childproof lock
If you activate the childproof lock, the appliance is
locked until you deactivate the childproof lock. If you
switch off the appliance after the next operation, the
childproof lock is not activated automatically.
Activating the childproof lock
▶
Press and hold the ​⁠ button until ​⁠ appears on the
display.
Deactivating the childproof lock
▶
Press and hold the ​⁠ button until ​⁠ goes out on
the display.