NEFF B4ACM5HH0B, Руководство пользователя и инструкции по установке

Страница: 23 / 40

Appliance door
en
23
17.4 Attaching the pull-out rail
Note:
The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
1.
Insert the pull-out rail between the two bars.
2.
Push the retainer in between the lower and the
upper bar.
3.
Keep the
PUSH
tab pushed in and swing the pull-
out rail inwards until the front retainer is located
between the two bars ⁠.
‒
Release the
PUSH
tab.
a
The retainer clicks into place.
4.
Pull the pull-out rail out as far as it will go and slide
it back in.
18 Appliance door
To ensure that your appliance retains its appearance
and remains fully functioning for a long time, you can
detach the appliance door and clean it.
WARNING ‒ Risk of injury!
If the hinges are not secured due to an incomplete
lock, they can snap shut with great force.
▶
To detach or attach the appliance door, always turn
the two locks as far as they will go.
▶
If the hinge snaps closed when detaching or attach-
ing the appliance door, do not reach into the hinge
– call the after-sales service.
18.1 Detaching the appliance door
Requirements
¡
Have a torch ready.
¡
Have a screwdriver ready.
¡
Have a coin ready.
1.
To make it easier to see the door lock, shine the
torch into the gap beside the appliance door.