NEFF B48FT38 0B Series, Инструкция по эксплуатации

Страница: 31 / 60

Rails
en
31
First wash cycle
1.
Open the control panel.
2.
Remove the water tank, rinse thoroughly, fill with
water and reinsert.
3.
Close the control panel.
4.
Touch the
#
touch button.
The appliance is rinsed. As soon as the wash cycle
has finished, an audible signal sounds.
Second wash cycle
1.
Open the control panel.
2.
Remove the water tank, rinse thoroughly, fill with
water and reinsert.
3.
Close the control panel.
4.
Touch the
#
touch button.
The appliance is rinsed. As soon as the wash cycle
has finished, an audible signal sounds.
Final cleaning
1.
Open the control panel.
2.
Empty and dry the water tank.
3.
Switch off the appliance.
Descaling is complete and the appliance is ready for
use again.
p
Rails
Rails
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.
Changing the shelf position for the
telescopic rail
Bars and telescopic rails can be positioned in any
order. For example, you can fit the telescopic rail to the
shelf position which you use the most frequently.
Removing the bar
Telescopic rails are removed and fitted like bars.
1.
Push the bar towards the back
‚
until it can be
pulled out upwards
ƒ
(Fig.
!
).
2.
Unhook the bar at the back and remove it (Fig.
"
).
Fitting the bar
1.
Fit the bar at the back (Fig.
!
).
2.
Push the bar towards the back
‚
and down
ƒ
onto
the pin
„
(Fig.
"
).
2 1
D
E
1