NEFF B47VR32.0B, Инструкция по эксплуатации

Страница: 27 / 52

Appliance door
en
27
q
Appliance door
Appliance door
With good care and cleaning, your appliance will retain
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
appliance door and clean it.
Removing and fitting the appliance door
To clean the door panels, you can detach the appliance
door.
:
Warning
Risk of injury!
The hinges of the appliance door may snap shut with
great force. Always fully turn the two locks for fitting and
removing the appliance door.
:
Warning
Risk of injury!
If the appliance door has been removed without turning
both locking levers to their limit stops, the hinge may
snap shut. Do not reach into the hinge. Call the
after ­ sales service.
Removing the appliance door
1.
Open the left- and right-hand hinge lock (Fig.
!
).
To do this, push the hinge lock (Fig.
"
) fully
upwards on both sides with a screwdriver.
Tip:
Light up the gap using a torch so that you can
find the hinge lock.
Hinge lock closed (Fig.
#
)
Hinge lock opened (Fig.
$
)
2.
Open the appliance door a little (Fig.
%
).
3.
Using a coin, fully turn both the left- and right-hand
locks on the inside of the appliance at the bottom
(Fig.
&
).
Left lock: Clockwise
Right lock: Anti-clockwise
4.
Close the appliance door a little, until you feel the
locks engage.
The door can no longer be closed.
5.
Lift the door handle slightly on the left- and right-
hand side using both thumbs
‚
and pull the
appliance door out upwards
ƒ
(Fig.
'
).
6.
Lay the appliance door on an even, soft and clean
surface.
Fitting the appliance door
1.
Fit the appliance door (Fig.
!
).
2.
Fit the appliance door in the left and right-hand guide
rollers simultaneously (Fig.
"
).
Ensure that the appliance door does not tilt unevenly
and that it is properly fitted in place.
3.
Turn the door handle upwards slightly
‚
so that the
appliance door slides downwards fully
ƒ
(Fig.
#
).
2I
1I
I I
II
II
I
D
E
2I
1I