25
disappear after the oven has been used several times.
Residues can be removed with water and a soft sponge.
Colour variations on the self-cleaning surfaces have no effect
on the self-cleaning function.
Caution!
■
Damage to surfaces on self-cleaning areas due to applying
oven cleaner.Never clean the self-cleaning surfaces with oven
cleaner.
If oven cleaner accidentally gets onto self-cleaning surfaces,
remove it immediately with a sponge and plenty of water.
■
Damage to surfaces on self-cleaning areas due to the use of
abrasive and acidic cleaning agents and aids.
Do not use cleaning agents containing abrasive substances
or acids.
Do not use abrasive cleaning aids such as steel wool or
scourers.
Oven cleaning
The back wall, ceiling and side walls of the cooking
compartment are coated with a highly porous ceramic layer.
This coating absorbs and disintegrates splashes from baking
and roasting while the oven is in operation.
If these self-cleaning surfaces (rough surfaces) in the oven no
longer clean themselves adequately, they can be regenerated
using the Oven cleaning operating mode.
ã=
Risk of burns!
The appliance becomes very hot during Oven cleaning. Keep
children away from the appliance.
Preparing for oven cleaning
1.
Remove accessories and hook-in racks, telescopic shelves
or separate fitting systems from the cooking compartment.
2.
Clean the enamel surfaces (smooth surfaces) to avoid any
lasting stains (see section: Cleaning the cooking
compartment).
Starting oven cleaning
1.
Press and hold the
~
button for 1 second.
The appliance switches on.
2.
Scroll the NeffNavigator® until “Oven cleaning” is selected,
and push down.
3.
Scroll the NeffNavigator® in order to select the oven cleaning
intensity, and push down.
4.
Touch the
m
button.
Starting oven cleaning at a later time
Before oven cleaning begins, set the end time.
1.
Set the operating mode to “Oven cleaning”.
2.
Scroll the NeffNavigator® in order to select the end time, and
push down.
3.
Scroll the NeffNavigator® to set the desired end time.
4.
Touch the
m
button.
Ending/cancelling oven cleaning
On reaching the end of operation, either the
x
symbol or the
x
and
y
symbols flash.
1.
Touch the
7
button.
2.
Press and hold the
~
button for 2 seconds.
Removing and fitting the appliance door
You can remove the appliance door to clean it more
thoroughly.
ã=
Risk of injury!
The hinges of the appliance door may snap shut with great
force. Always fully turn the two locks for fitting and removing the
appliance door.
ã=
Risk of injury!
If the appliance door has been removed without turning both
locking levers to their limit stops, the hinge may snap shut. Do
not reach into the hinge. Call the after
sales service.
Removing the appliance door
1.
Open the left and right-hand hinge lock (Fig. A).
To do this, push the hinge lock (Fig. B) fully upwards on both
sides with a screwdriver.
Hinge lock closed (Fig. C)
Hinge lock open (Fig. D)
2.
Open the appliance door a little (Fig. E).
3.
Using a coin, fully turn both the left and right-hand locks on
the inside of the appliance at the bottom (Fig. F).
Left lock: clockwise
Right lock: anti-clockwise
4.
Close the appliance door a little, until you feel the locks
engage.
The door can now no longer be opened or closed.
Intensity
Cooking time
1
x
0:45 h
2
x
1:00 h
3
x
1:15 h
$
%
&
'
(
)
