NEFF B46C42 0 Series, Инструкция по эксплуатации

Страница: 11 / 40

11
After each steam-assisted use
1.
Switch off the appliance.
The remaining water is pumped out of the evaporator system
and back into the water tank. "Pumping-out" appears in the
text display.
2.
Only empty the water tank once "Pumping-out finished" has
been displayed.
3.
Empty and wash the water tank, and leave it to dry with the lid
open.
4.
Wipe the cooled cooking compartment down with a soft
cloth.
5.
Remove any dirt from the cooking compartment.
Note:
Remove limescale marks with a cloth soaked in
vinegar, then wipe with clean water and rub dry with a soft
cloth.
Automatic safety cut-out
The automatic safety cut-out is only activated if you have not
made any settings on your appliance for a prolonged period.
You can adjust the period of time after which your appliance
shuts off.
"Safety cut-out" appears in the text display and
‹‹‹ flashes in
the temperature display. Appliance operation is interrupted.
Turn the operating mode selector to the
Û position to
deactivate it.
Changing the basic settings
Your appliance has various basic settings, which are preset at
the factory. You can change these basic settings as required.
1.
Switch on the appliance.
2.
Press and hold the ± info button for 3 seconds to go to the
basic settings menu.
The text display shows "Select language: English". If the
appliance controls are locked, you must unlock them first.
3.
Press the ± info button repeatedly until the current basic
setting for the relevant submenu is displayed on the text
display (e.g. "Audible signal off").
4.
Using the temperature selector, set the required basic setting
within a submenu (e.g. "Audible signal 2 minutes").
5.
Press and hold the
±
info button for 3 seconds.
Your basic setting is saved.
Note: If nothing is entered after 15 seconds, the Basic settings
menu is automatically closed. "Appliance is ready for use"
appears in the text display.
You can change the following basic settings:
Basic settings menu
Submenu
Basic setting Setting
symbol
Language Select language
Childproof lock Appliance unlocked
™‚‹
Appliance locked
™‚‚
Appliance perma-
nently locked
™ƒ‚
Audible signal Audible signal off
™„‹
Audible signal
30 seconds
™„‚
Audible signal
2 minutes
™„ƒ
Audible signal
10 minutes
™„„
Adjust individually*
A ÙÙÙØÙÙÙ @ ™… ...
Water hardness softened
™†‹
1 - soft
™†‚
2 - medium
™†ƒ
3 - hard
™†„
Altitude calibration below 0 m
™‡‹
0 - 300 m
™‡‚
300 - 600 m
™‡ƒ
600 - 900 m
™‡„
900 - 1200 m
™‡…
1200 - 1500 m
™‡†
1500 - 1800 m
™‡‡
1800 - 2100 m
™‡ˆ
2100 - 2400 m
™‡‰
above 2400 m
™‡Š
Restore factory settings Do not restore
™ˆ‹
Restore
™ˆ‚
* You can use this basic setting to adjust the browning level for
all automatic programmes (see section: Automatic pro-
grammes).
Basic settings menu
Submenu
Basic setting Setting
symbol