6
Note:
The baking tray and universal pan may become distorted
during use. This is caused by the considerable temperature
differences acting on the accessories. This may happen when
only a part of the accessory is covered with food or when
frozen items such as pizza have been placed on the accessory.
Before using the appliance for the first time
In this section, you can read about
■
How to set the clock after connecting up your appliance
■
How to clean your appliance before using it for the first time
Setting the clock
Note:
When you press the
KJ
clock function button, you have
3 seconds to set the clock using the rotary selector. Should this
have been insufficient for you, you can amend the clock time
later.
‹
:
‹‹
flashes in the clock display.
1.
Briefly press the
KJ
clock function button to go to the
setting mode.
The
KJ
and
3
symbols light up.
‚ƒ
:
‹‹
appears in the
clock display.
2.
Set the current time using the rotary selector.
Your setting is accepted after 3 seconds.
Changing the clock
To subsequently change the time, press the
KJ
clock function
button repeatedly until the
KJ
and
3
symbols light up again.
Change the time with the rotary selector.
Cleaning the appliance
Clean your appliance before using it for the first time.
1.
Remove the accessories from the cooking compartment.
2.
Completely remove any residual packaging (e.g. chips of
polystyrene) from the cooking compartment.
3.
Clean the accessories and cooking compartment with hot
soapy water (see section: Cleaning and care).
4.
Heat with
%
Top/bottom heat at 240 °C for 30 minutes.
5.
Afterwards, wipe the cooled cooking compartment with hot,
soapy water.
6.
Clean the outside of the appliance with a soft, damp cloth
and soapy water.
Operating the appliance
In this section, you can read about
■
how to switch your appliance on and off
■
how to select an operating mode and temperature
■
how you can change the basic settings
■
when your appliance switches off automatically
Switching on the appliance
1.
Turn the operating mode selector until the desired operating
mode is selected.
A default temperature appears on the temperature display.
2.
Turn the temperature selector to change the default
temperature.
Notes
■
The
>
EasyClean® and
/
Low-temperature cooking
operating modes can only be started if neither
•
nor
œ
are
shown in the temperature display.
■
If no default temperature is displayed, the temperature of your
selected operating mode is a fixed setting. You cannot
change this temperature.
Wire rack, stepped with cut-out
Z1432X0
Wire rack, flat
Z1442X0
Roasting tray, enamelled, two-piece
Z1512X0
CLOU 3x telescopic railings retrofit kit
Z1742X1
CLOU 4x telescopic railings retrofit kit
Z1752X1
Bread-baking stone
Z1912X0
Universal roasting dish, enamelled
Z9930X0
Accessories
Order no.
