Trouble shooting
en
21
3.
Push the inner panel in at the top (fig.
#
).
4.
Slide the outer panel back in and make sure that it is
sitting correctly at the bottom in the retainer (fig.
$
).
5.
Push the outer panel in at the top (fig.
%
).
6.
Put the cover back in place and press on it until you
hear it click into place (fig.
&
).
7.
Open the appliance door again fully.
8.
Close the two locking levers on the left and right
(fig.
'
)
9.
Close the appliance door.
Caution!
Do not use the cooking compartment again until the
panels have been correctly fitted.
3
Trouble shooting
Trouble shooting
If a fault occurs, there is often a simple explanation.
Before calling the after-sales service, please refer to the
fault table and attempt to correct the fault yourself.
Rectifying faults yourself
You can often easily rectify technical faults with the
appliance yourself.
If a dish does not turn out exactly as you wanted, you
can find useful cooking tips and instructions at the end
of this instruction manual.
--------
:
Warning – Risk of injury!
Incorrect repairs are dangerous. Do not attempt to
repair the appliance yourself. Repairs must only be
carried out by one of our trained after-sales engineers. If
the appliance is defective, call the after-sales service.
:
Warning – Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be
carried out and damaged power cables replaced by
one of our trained after-sales technicians. If the
appliance is defective, unplug the appliance from the
mains or switch off the circuit breaker in the fuse box.
Contact the after-sales service.
Error messages on the display
If an error message with "
“
" appears on the display,
e.g.
“‹†
-
„ƒ
, touch the
v
button. This will reset the
error message. Reset the time, if necessary.
If the fault was a one-off, you can continue to use your
appliance as normal. If the error message appears
again, call our after-sales service and quote the exact
error message and the E no. of your appliance.
g
g
Fault
Possible
cause
Notes/remedy
The appliance is
not working.
Defective cir-
cuit breaker.
Check the circuit breaker in the
fuse box.
Power failure Check whether the kitchen light
or other kitchen appliances are
working.
The time is flash-
ing on the display.
Power failure. Reset the time.
No settings can
be made on the
appliance. The
symbol
1
lights
up in the display.
The child-
proof lock is
activated.
Press and hold the
v
button until
the
1
symbol goes out in the dis-
play. Settings can be made on the
appliance.
The childproof lock can be deacti-
vated in the basic settings.
Содержание B1ACE4A 0A Series
Страница 1: ...en INSTRUCTION MANUAL BUILT IN OVEN B1ACE4A 0A...
Страница 2: ......
Страница 35: ......
Страница 36: ...9001284917 9001284917 980815 en...