Nederman L-PAK Series, Руководство пользователя, Страница: 8 / 17

L-PAK 150/250 Standard EN
8
5.1.1 L-PAK Off (Off mode)
The unit is in Off mode, which is also the unit’s start menu. The unit can also go into Off
mode if something is wrong, such as if an alarm is activated. The pump motor is off, there is
no vacuum, the FCV is closed, and the unit cannot be activated by a pilot signal.
ESC OK
Nederman
Hi Vacuum Unit
L-PAK
OFF
Time To Service
2000 hours
TimeToService: The amount of time until next scheduled service. The
default setting is 2000 hours. See Section
6.2.2. H-Meter 1
.
5.1.2 L-PAK Standby (Standby mode)
The unit is in Standby mode and is ready. The pump motor is off, there is no vacuum, the
FCV is closed, and the unit is waiting for a pilot signal to go into Running mode.
ESC OK
Hi Vacuum Unit
Standby
Wai ti ng For
Pilot Signal
Mo 15:33
2018-01-22
5.1.3 Running (Running mode)
The unit in Running mode. The pump motor is on and the unit generates a vacuum. The
FCV is closed.
ESC OK
Hi Vacuum Unit
Running
Time 05:33 Min
DIRTm 00:00 s
DIRTm: The amount of time before the unit goes into Idling mode. The
default is 10 seconds. See also Section
6.2.4. DIR_Time
.
OTTmr: If the Overtime timer has been activated, OTTmr shows the
elapsed time since the overtime timer started.
Time: The number of minutes the fan engine has been running since the
last start.
5.1.4 Idling (Idling mode)
The unit in Idling mode. The pump motor is on, there is no vacuum, and the FCV is open.
The unit goes into Idling mode when there has been no pilot signal for the time set in DIR_
Time, see Section
6.2.4. DIR_Time
.
ESC OK
Hi Vacuum Unit
IDLING
Time To
StandBy
05:33m
Time to Standby: The amount of time until the unit goes into Standby
mode. The default setting is 12 minutes. See Section
6.2.3. SSR_Time.