Nederman E Series, Инструкция по эксплуатации

Страница: 25 / 210

E - Vacuum Cleaners
25
EN
Items to inspect What to look for Service
If specified vacuum is not reached
See Section 9, Troubleshooting .
Abnormal noise level.
7 Spare parts
CAUTION! Risk of equipment damage.
Use only Nederman original spare parts and accessories.
For spare parts, see the attached Spare Parts manual.
Contact your nearest authorized distributor or Nederman for advice on technical service or
if you require help with spare parts. See also www.nederman.com.
Ordering spare parts
When ordering spare parts always state the following:
• Part number and control number (see the product identification plate).
•
Detail number and name of the spare part (see www.nederman.com).
• Quantity of the parts required.
7.1 Recycling
The product has been designed for component materials to be recycled. Its different
material types must be handled according to relevant local regulations. Contact the
distributor or Nederman if uncertainties arise when scrapping the product at the end of its
service life.
8 Troubleshooting
WARNING! Risk of personal injury.
• Always disable control system before disconnecting power to vacuum cleaner.
•
Disconnect vacuum cleaner from compressed air and electrical supply before any type of
service or transportation. See figure 1 (B).
• Be cautious when performing maintenance; there is a crush risk with a pneumatic
cylinder and discharge valve.
• Always make sure ball valve is closed before checking the vacuum cleaner. See figure
1 (B).
• Always use proper lifting equipment when using lifting lugs to lift vacuum cleaners.
• Do not place vacuum cleaner on an uneven or sloping surface.
• Use a forklift to transport vacuum cleaners with a stand or trolley, unless the vacuum
cleaner is equipped with eye bolts.
• Lock the vacuum cleaner’s wheels before service.
• For adjustable frames, do not make any height adjustments when the silo is filled with
material.
• Always use proper protective equipment where there is a risk for exposure to dust, see
figure 10 .
• Wear an approved breathing mask, and do not spread dust when cleaning or replacing
filters, see figure 10 .
•
Empty dust into a container or dust bag, see figure 10 .
• Watch your head. The height of the frame is low.