Nederman E Series, Инструкция по эксплуатации

Страница: 20 / 210

E - Vacuum Cleaners EN
20
Certain A products are equipped with bulk-bag holders for collecting material. Other
collection methods may be used if the system risk analysis finds them to be safe.
Place a bulk bag on a pallet and position it under the bulk-bag holder. The buckle on the
bulk-bag holder secures the bulk bag opening to the holder, see figure 6 (A).
Connect the bulk-bag corner straps to the chains on the bulk-bag holder. Adjust the tension
by moving the quick link up or down the chain, see figure 6 (B).
5 Use
WARNING! Explosion risk.
• Do not collect items that may cause ignition or blocking. It is strictly prohibited to collect
material that can undergo dangerous chemical or thermal reactions and/or self-ignite.
• If this unit is used to collect of hazardous material, or is located where such material is
present, contact your nearest authorized distributor or Nederman for technical advice.
• Do not use vacuum cleaner to collect material that is caustic, hot, explosive, highly
flammable, chemically unstable, spontaneously ignitable, or which can release sparks.
WARNING! Risk of personal injury.
• Only properly trained personnel are allowed to use this vacuum cleaner.
• Make sure all modules, hoses, and cables are securely fastened before use. See figure 15 .
•
Do not use if the ambient temperature exceeds 40°C.
• Do not expose the body to vacuum inlets when operating the unit.
• Always use proper protective equipment such as safety shoes and hearing protection.
•
Always use proper protective equipment where there is a risk for exposure to dust, see
figure 10 .
• Watch your head. The height of the frame is low.
CAUTION! Risk of equipment damage.
• The float ball can be removed when collecting dry material.
• Use the correct filter for collecting wet material.
• Turn off vacuum cleaner if liquid or foam escapes from it.
• If wet material is to be vacuumed, use a float ball and filter designed for that purpose.
• Make sure the manual discharge valve is closed before starting the vacuum cleaner. It
cannot be accessed during operation.
•
Do not use the vacuum cleaner if there is restricted or no airflow. The fan motor can
become overheated.
• 110V units can affect other electrical equipment.