Nederman 30S Series, Руководство пользователя, Страница: 12 / 131

Portable Vacuum Unit
EN
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
NOTE!
Notes contain other information that is import-
ant for personnel.
2.2 General
WARNING! Risk of personal injury
• The Portable Vacuum Unit with 3 phase motor may only be connected to a grounded socket of the
voltage stated on the machine data plate.
• Any damaged electrical component should immediately be replaced with a genuine spare part. Such
work may only be performed by a person with the necessary knowledge of electrical equipment. Other
damaged parts should also be replaced with genuine parts in order to reduce the risk of personal injury.
• The Portable Vacuum Unit must be disconnected prior to any intervention. Disconnect by unplugging
the power supply/plug or uncoupling the compressed air connection.
• Before starting, the operator must ensure that the Portable Vacuum Unit is correctly configured.
• During starting, the Portable Vacuum Unit may move in a sideways direction. Always hold onto it when
starting.
• It is prohibited to lift the Portable Vacuum Unit by the handle. Instead, lift by the frame’s lifting loop
(optional). The receptacle must be empty when lifting. It is prohibited to be underneath the Portable
Vacuum Unit when it is being lifted. See
Section 4.5 Transport and lifting .
• The eccentric catches holding the collecting receptacle must be secured by locking cotters.
• Hot or red-hot material, flammable fluids, explosive or health-impairing fumes or dust that could cause
an explosion may not be sucked into the Portable Vacuum Unit. Neither may it be used in spaces where
such material exists, i.e. an explosive atmosphere.
• Do not put the vacuum hose inlet near the eyes, ears or other part of the body.
• Anti-static vacuum hoses and hose fittings should be used in order to reduce the danger of sparks and
dust explosions.
• Take care not to spread dust when changing the plastic sack or bag and when replacing the micro-filter.
Wear an approved breathing mask in the case of hazardous dust.
• Do not run the Portable Vacuum Unit for more than 1 minute when it is almost or fully throttled. Little
or no airflow could result in overheating of the fan and motor. Avoid touching the fan/motor as this
could cause burns.
• The Portable Vacuum Unit is not classified as a wet vacuum cleaner. Large amounts of water may not
be sucked into the unit. However, it may be used for damp material and in a damp environment.
12