Nederman 30S Series, Руководство пользователя, Страница: 16 / 131

Portable Vacuum Unit
EN
• That the flap valve seals. See Figure 4 , item b.
5.6 Receptacle
WARNING! Risk of personal injury
Use an approved breathing mask if the dust is
health-impairing.
The collecting receptacle should be emptied before it
has reached 2/3 of its volume. Clean the filter before
the Portable Vacuum Unit is emptied and unplug the
connector from the mains.
• Disconnect the receptacle and pull it to the side. Tie
up the sack. Insert a new sack and ensure that it fills
the receptacle.
5.7 Frame
Check the lifting loop regularly for signs of damage.
Also check the screw mountings. Broken parts should
be replaced.
5.8 Wheels
• Check that the wheels are intact, are securely fit-
ted and roll easily, if necessary, lubricate or replace
the air pressure for air-filled wheels, recommended
pressure is indicated on the wheel.
6 Spare Parts
CAUTION! Risk of equipment damage
Use only N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
original spare parts and ac-
cessories.
Contact your nearest authorized distributor or
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
for advice on technical service or
if you require help with spare parts. See also
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
.
6.1 Ordering spare parts
When ordering spare parts always state the following:
• The part number and control number (see the
product identification plate).
• Detail number and name of the spare part (see
w
$
w
$
w
$
.
$
n
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
.
$
c
$
o
$
m
$
/
$
e
$
n
$
/
$
s
$
e
$
r
$
v
$
i
$
c
$
e
$
/
$
s
$
p
$
a
$
r
$
e
$
-
$
p
$
a
$
r
$
t
$
-
$
s
$
e
$
a
$
r
$
c
$
h
$
).
• Quantity of the parts required.
7 Recycling
The product has been designed for component mater-
ials to be recycled. Different material types must be
handled according to relevant local regulations. Con-
tact the distributor or
$
N
$
e
$
d
$
e
$
r
$
m
$
a
$
n
$
if uncertainties arise
when scrapping the product at the end of its service
life.
16