Nederman 160E Series, Руководство пользователя

Страница: 12 / 83

Portable Vacuum Unit
EN
1 Preface
Thank you for using a Nederman product!
The Nederman Group is a world-leading supplier and
developer of products and solutions for the environ-
mental technology sector. Our innovative products
will filter, clean and recycle in the most demanding of
environments. Nederman's products and solutions will
help you improve your productivity, reduce costs and
also reduce the impact on the environment from in-
dustrial processes.
Read all product documentation and the product iden-
tification plate carefully before installation, use, and
service of this product. Replace documentation imme-
diately if lost. Nederman reserves the right, without
previous notice, to modify and improve its products
including documentation.
This product is designed to meet the requirements
of relevant EC directives. To maintain this status, all
installation, maintenance, and repair is to be done
by qualified personnel using only Nederman original
spare parts and accessories. Contact the nearest au-
thorized distributor or Nederman for advice on tech-
nical service and obtaining spare parts. If there are
any damaged or missing parts when the product is de-
livered, notify the carrier and the local Nederman rep-
resentative immediately.
2 Safety
2.1 Classification of important informa-
tion
This document contains important information that
is presented either as a warning, caution or note, ac-
cording to the following examples:
WARNING! Risk of personal injury
Warnings indicate a potential hazard to the
health and safety of personnel, and how that
hazard may be avoided.
CAUTION! Risk of equipment damage
Cautions indicate a potential hazard to the
product but not to personnel, and how that
hazard may be avoided.
NOTE!
Notes contain other information that is import-
ant for personnel.
2.2 General
WARNING! Risk of personal injury
• The Portable Vacuum Unit with a 1-phase
motor may only be connected to a grounded
power socket of the same voltage as stated
on the machine data plate.
• A damaged component should immediately
be replaced with a new genuine spare part.
Electrical components may only be replaced
by a person with the necessary expertise.
• The Portable Vacuum Unit must be discon-
nected from the power (remove the plug
from the power socket) before carrying out
any form of intervention, e.g. dismantling the
motor assembly or replacing a micro-filter.
• Take care not to spread dust when changing
the plastic sack and when replacing the mi-
cro-filter. Wear an approved breathing mask
in the case of hazardous dust.
• Do not put the vacuum hose inlet near the
eyes, ears or other parts of the body.
• Hot or red-hot material, flammable fluids, ex-
plosive or health-impairing fumes as well as
dust that could cause a dust explosion must
not be sucked into the Portable Vacuum Unit.
Neither must the Portable Vacuum Unit be
used in environments where such material
exists.
NOTE!
Welding fumes are classified as
health-impairing fumes.
• Do not operate the Portable Vacuum Unit
with a 1-phase motor when the vacuum is al-
most or fully restricted. Little or no airflow
results in overheating of the motor.
• The Portable Vacuum Unit is not classified
as a wet vacuum cleaner. Large amounts of
water may not be sucked into the unit. How-
ever, it may be used for damp material and in
a damp environment.
3 Description
3.1 Function
The Portable Vacuum Unit is electrically driven.
1-phase with separately cooled motors. It can be
provided with manual and automatic start/stop modes
depending on the model. With automatic start/stop, it
is controlled by a connected electrical tool.
The rated power, voltage, safety class, flow, work-
ing pressure, max pressure, etc. are stated on the ma-
chine data plate. The noise level during normal opera-
tion is 75 dB(A) according to ISO 11201.
Dust separation takes place in three stages:
12