TRANSIT ENTRY | INSTALLATION GUIDE
Installation
6/30
2.4
OPENING THE SERVICE COVER
The service cover can be opened to access the connections, control the read range,
setup the operating frequency and view the LED indicators.
Open the screws on the bottom of the device to unlock the service cover. Once the
service cover is unlocked, lift it off.
Figure 4: Opening the service cover
2.5
INSTALLING AN OPTIONAL INTERFACE BOARD
Make sure to follow all safety precautions outlined in chapter 2.1 and disconnect the
power supply when installing or replacing an optional interface board.
2.6
AVAILABLE INTERFACE BOARDS
Various optional interface boards are also available for the TRANSIT Entry.
Ethernet (TCP/IP) interface board
Connects the TRANSIT Entry to an Ethernet network using the
TCP/IP protocol.
See for detailed information about the Ethernet communication
board its user's manual.
MTR Module (Multi Technology Reader Module)
The MTR Module enables proximity reading of many
transponders types such as HID Prox, EM read-only, Mifare and
HID iCLASS.
HIB (HID Interface Board)
Enables the reading of HID prox cards with an HID Prox Booster.
See appendix 9BB for part numbers.
Note
Make sure the screws are
completely opened (and
closed when placing the
cover back on). Don’t worry
about losing the screws,
they cannot fall out.
