ANPR ACCESS | INSTALLATION GUIDE
Configuration
14/36
5.2.3
CAMERA CONTEXT
This page displays the color image grabbing camera settings used for shooting
context images.
Enable:
Select YES to enable a context camera.
IP Address:
The context camera IP address.
Protocol:
Select context camera protocol:
STANDARD: Vega network context camera protocol.
HTTP: Generic HTTP camera acquisition.
Packet timeout:
Default 20 seconds.
HTTP String:
The string that you use to get the image by the browser.
HTTP Authorization:
Enable if you need to use a HTTP authorization.
HTTP Username:
HTTP authorization username (Only if HTTP Authorization
is enabled).
HTTP Password:
HTTP authorization password (Only if HTTP Authorization
is enabled).
HTTP LINK:
Click on the HTTP-LINK to directly access the context
camera. The hyperlink uses the parameters entered
above. This is useful to check whether the context camera
is operating properly and to verify if the settings are
correct.
Example
URL to get image from context camera (e.g. http://192.168.0.1/jpg/image.jpg)
Protocol:
HTTP
IP Address
192.168.0.1
HTTP String
/jpg/image.jpg
If HTTP Authorization is required (e.g. my_username / my_password):
HTTP Authorization
YES
HTTP Username
my_username
HTTP Password
my_password
Go to Events and Actions (chapter 5.2.7) to configure when the context camera will
be triggered.
5.2.4
PLATE READER
The ANPR system is capable of real time OCR processing grabbed images. Up to 4
countries number plates can be simultaneously read. It is necessary to update the
ANPR firmware library if the user wants to change the countries the system should
read.
To view the countries the ANPR system is capable of reading, please access the web
server and click the DeviceInfo icon: go to the line that shows the firmware library
version, as in the example below:
Example
Firmware version = VEGA ACCESS 7.85 NLD-EU