Installation and Configuration |
AEOS Blue and vehicle identification
EN
Manual version
3
29/48
10.
Press CTRL+E and click Yes to deploy the configuration.
11.
Close AEmon.
Configuration example
4.4
Configuring AEOS
To configure AEOS for the ANPR Access reader, take the following steps:
Define the identifier type in AEOS
To define the identifier type, which is a 'generic' AEOS identifier type, do as follows:
1.
Go to Administration > Maintenance > Identifiers > Identifier types.
2.
Click New.
3.
Enter a Name (in this example: ANPR) and Sub type, Customer code type, Identifier length,
minimum value and maximum value.
Step
01
